How to cleaning guitar string...?

In this tutorial, I'll show you how to clean guitar strings.

Guitar strings are just as important as fret boards: You can't play a thing without them. So keeping the strings clean and smooth is extremely important. This guide will help guitar owners to keep their strings in optimum condition and increase the string's longevity.

Step :

• Lay the guitar on its back, resting the head stock on small box or similar, to stop the machine heads going out of tune.
• Grab a sheet of towel/cloth and fold it in half length wise. Fold it length wise again so you have a long rectangular piece. Do the same thing to the other sheet. This one will be the "Oiling Rag".
• Slide the dry sheet under the guitar strings just near the bridge, then fold it over so the other half covers the top of the strings.
• Now, slide this piece along the length of the strings, right up to the nut. Apply some downward pressure to clean the top part, and pull up on the paper to clean the underside of the strings too. (This is just as important as the top) Even if the head gets lifted off it's mount, it still helps.
• If you notice a little bit of muck and dirt on the towel, then you're doing fine. It won't always be like that, but this step helps set the strings for the oiling.
• Apply some WD40 to one side of the other piece of paper towel and wrap it around the strings the same way as the first piece. Run this piece along the length of the strings using the same process as before.

• When that's finished, the strings should look noticeably shiny and be very oily and smooth to touch.

Tips :

• This technique can be applied to most types of guitar. The only variation needed is when your dealing with a Bass guitar or a Warr guitar. Due to the thickness of each individual string, you're much better off cleaning them one at a time for that perfect result.
• When you pick up the guitar again, you might want to get another piece of dry paper towel and repeat step 5 if you don't like the feel of oily fingers.
• Or you could buy The String Cleaner - it's a little gadget made by ToneGear - that does this really easily. Run it up and down the strings after each use.
• It's best done maybe once a week or whenever you feel the strings need a touch-up.

Warning..!!!

• This process can sometimes drop the guitar out of tune from too much pressure on the strings.
• Little bits of paper towel might stick to the strings, but if you've folded the paper properly, this can be avoided completely.
• This will permanently alter the characteristics of wound strings as some WD40 will remain trapped between the winding and core wire resulting in changes to the sound and tuning problems from the unevenness of the trapped WD40.
• Try not to get any oil on the fret board. It doesn't harm the guitar in any noticeable way, it just makes it look kind of sloppy.
• You may find the strings far too slippery to play properly after you have done this.
• Nylon string guitars won't need any oil when cleaning. A light spot of water on the towel will suffice, being careful not to get any on the guitar itself.

 Thanks for read my tutorial, see you next time....!!! \m/